|
Do it yourself
| |||
| ||||
|
Model: Enfield Classic 350
To carry out the engine oil replacement of the Royal Enfield Classic 350, unscrew the drain plug of the oil sump located at the bottom centre of the bike: once this plug is unscrewed, allow all the oil to drain into a container. At this point, remove the oil filter located at the bottom of the bike so it can also be replaced with a new spare part; now you can finish by topping up with the necessary amount of oil from the breather on the right side.
Posted on 2 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Classic 350
To change the engine oil of the Royal Enfield Classic 350, loosen the drain plug located at the central lower part of the motorcycle. Once the plug i…
Classic 350
In this guide, you will learn how to carry out the regular maintenance service by replacing the engine oil and oil filter on the Royal Enfield Classi…
Classic 350
In this guide, we will provide instructions for performing routine maintenance by changing the engine oil and oil filter on the Royal Enfield Classic…
|
How to Replace and Install the Front Wheel on a Beta RR 300
Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
