Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Himalayan
Part: Tires

This guide provides step-by-step instructions on how to remove and replace the front tyre on a Royal Enfield Himalayan. First, place the motorcycle on its centre stand and begin unscrewing the central axle bolt, then unscrew the bolts of the front brake caliper; remove the wheel as shown in the video. At this point, replace the tyre by deflating it and using special levers to remove the tyre from the rim; install the new tyre and reassemble the front wheel, securing the brake caliper.

Posted on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on the Royal Enfield Himalayan?
How to Replace the Front Headlight on the Royal Enfield Himalayan?
Himalayan In this tutorial, we will see how to replace the front headlight on the Royal Enfield Himalayan, a very simple and quick operation. First, ensure tha…
How to replace the headlight bulb in the Royal Enfield Himalayan?
How to replace the headlight bulb in the Royal Enfield Himalayan?
Himalayan In this tutorial we can see how to replace the headlight bulb in the Royal Enfield Himalayan, an extremely simple and quick operation. First of all, …
How to replace the oil in the front forks of the Royal Enfield Himalayan
How to replace the oil in the front forks of the Royal Enfield Himalayan
Himalayan In this guide we will see the instructions that will allow us to disassemble and replace the oil of the front forks of the Royal Enfield Himalayan. F…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos