Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start the engine for a few minutes to warm up the engine oil. I recommend using Pro 4 10W-50 oil, suitable for four-stroke engines. Unscrew the drain plug located underneath the motorcycle and collect the used oil. Meanwhile, remove the oil filter: simply unscrew it to take it out of its housing. Before inserting the new filter, I recommend lubricating its O-ring; you can use the old oil for this, just ensure the filter is not inserted 'dry'. Screw the drain plug back in and fill with the recommended oil through the upper hole.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Is the user manual for the Royal Enfield Interceptor 650 available in German?
Is the user manual for the Royal Enfield Interceptor 650 available in German?
Interceptor 650 Yes, the user manual for the Royal Enfield Interceptor 650, to be consulted for performing routine maintenance and any repairs, is mainly available i…
How to Replace the Battery on the Royal Enfield Interceptor 650
How to Replace the Battery on the Royal Enfield Interceptor 650
Interceptor 650 To replace the battery on the Royal Enfield Interceptor 650, open the relevant cover with the key located on the right side of the bike, just below t…
How to Replace the Rear Shock Absorber on the Royal Enfield Interceptor 650?
How to Replace the Rear Shock Absorber on the Royal Enfield Interceptor 650?
Interceptor 650 To replace the rear shock absorber on the Royal Enfield Interceptor 650, you need to loosen the two mounting bolts that secure the shock absorber in …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos