Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Wheel on the Royal Enfield Bullet 350 - 500

Model: Enfield Bullet 350
Part: Wheel

Video tutorial

In this short video, you will see the main instructions that will allow you to remove the front wheel on the Royal Enfield Bullet 350, as well as the 500. First, unscrew the two bolts securing the fork, located at the bottom; then disconnect the front brake cable by loosening the adjuster with a spanner, as shown in the video.

At this point, lift the motorcycle and also remove the speedometer cable; now gently extract the front wheel.

For reassembly, simply follow the reverse procedure!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel Bearing on a Royal Enfield Bullet 350
Bullet 350 .. on the Royal Enfield Bullet 350, as well as the 500. First, place your motorcycle on the centre stand and start by unscrewing the central axle of the.. …
How to Replace the Rear Light Bulb on the Royal Enfield Bullet 350 - 500
How to Replace the Rear Light Bulb on the Royal Enfield Bullet 350 - 500
Bullet 350 .. Enfield Bullet 350 motorcycle, as well as the 500. First, place the motorcycle on the centre stand and begin to remove the rear light cover by unscrewing.. …
How to replace the headlight bulb in the Royal Enfield Bullet 350?
How to replace the headlight bulb in the Royal Enfield Bullet 350?
Bullet 350 In this tutorial, you will see how to replace the headlight bulb in the Royal Enfield Bullet 350, a very simple and quick operation. First, ensure th…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos