Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Royal Enfield Bullet 350 - 500

Model: Enfield Bullet 350
Part: Tail light bulb

Video tutorial

Today's guide will show you the steps to remove and replace the rear light bulb on the Royal Enfield Bullet 350 motorcycle, as well as the 500. First, place the motorcycle on the centre stand and begin to remove the rear light cover by unscrewing the two fixing screws; then press and twist the bulb to remove it from the holder, as illustrated in the video.

At this point, install the new bulb of the correct type and with the same fitting; check its operation and finally reassemble the light cover!


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Replace the Front Headlamp Lens on the Royal Enfield Standard Bullet 350
Replace the Front Headlamp Lens on the Royal Enfield Standard Bullet 350
Bullet 350 This video outlines the steps to remove and replace the lens (or glass) of the front headlamp on the Royal Enfield Standard Bullet 350. First, remove…
Removing the Front Wheel on the Royal Enfield Bullet 350 - 500
Removing the Front Wheel on the Royal Enfield Bullet 350 - 500
Bullet 350 .. on the Royal Enfield Bullet 350, as well as the 500. First, unscrew the two bolts securing the fork, located at the bottom; then disconnect the front.. …
How to replace the headlight bulb in the Royal Enfield Bullet 350?
How to replace the headlight bulb in the Royal Enfield Bullet 350?
Bullet 350 In this tutorial, you will see how to replace the headlight bulb in the Royal Enfield Bullet 350, a very simple and quick operation. First, ensure th…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos