Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on the Royal Enfield Classic 350

Model: Enfield Classic 350

Video tutorial

In this video tutorial, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 in simple steps. First, position the motorcycle on the centre stand; then disconnect the clutch cable by unscrewing the adjuster screw located at the bottom, as shown in the video.

At this point, disconnect the wire from the clutch lever; to do this, loosen the adjuster screw and remove the wire from the end. Finally, replace it and reassemble everything, applying a light layer of grease, following the video until the end!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Cable on the Royal Enfield Classic 350
Classic 350 In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the c…
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
Classic 350 Below are the instructions to adjust the clutch cable on a Royal Enfield Classic 350 motorcycle, as well as on the Bullet. First, place your motorcyc…
How to Replace the Clutch Cable on the Royal Enfield
How to Replace the Clutch Cable on the Royal Enfield
Classic 350 This guide shows how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle, following the instructions below. First, pla…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos