Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on the Royal Enfield

Model: Enfield Classic 350

Video tutorial

This guide shows how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle, following the instructions below. First, place your motorcycle on the stand and start by disconnecting the clutch cable from the adjuster found on the right side engine casing; then unscrew the clamp screw, disconnecting the clutch cable from the lever, as illustrated in the video.

At this point, install the new cable along with the sheath, securing it properly and adjusting it from the adjuster and the lever!


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Cable on the Royal Enfield Classic 350
Classic 350 In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the c…
How to Replace the Clutch Cable on the Royal Enfield Classic 350
How to Replace the Clutch Cable on the Royal Enfield Classic 350
Classic 350 In this video tutorial, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 in simple steps. First, position t…
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
Classic 350 Below are the instructions to adjust the clutch cable on a Royal Enfield Classic 350 motorcycle, as well as on the Bullet. First, place your motorcyc…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos