Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will learn how to perform the routine maintenance oil change on the Royal Enfield Bullet, both the 350 and 500 versions. First, position the centre stand on your bike and start by removing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; afterwards, clean the drain plug thoroughly and then unscrew the oil filter bolt to replace it with a new one, as shown in the video. At this point, pour the new oil of the correct type into the crankcase!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Grips on the Royal Enfield Bullet 350?
How to Replace the Grips on the Royal Enfield Bullet 350?
Bullet 350 To replace the grips on the Royal Enfield Bullet, you need to loosen the central nut that secures the counterweight to the end of the handlebar; once…
How to Change the Engine Oil on the Royal Enfield Bullet 350
How to Change the Engine Oil on the Royal Enfield Bullet 350
Bullet 350 Today, let's discover the instructions on how to perform the routine maintenance service by changing the engine oil on the Royal Enfield Bullet 350. …
How do you replace the clutch of the Royal Enfield Bullet 350?
How do you replace the clutch of the Royal Enfield Bullet 350?
Bullet 350 To replace the clutch of the Royal Enfield Bullet 350, you need to loosen the screws that secure the side panel of the motorcycle, on the left side i…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos