Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to change the engine oil in the Royal Enfield Bullet 350, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then place a container underneath, locate the two drain plug bolts, and unscrew them with a socket wrench. Wait for all the oil in the system to drain out, move to the right side, and open the filter housing. Now insert the replacement, reassemble everything, and pour in the new oil through the designated hole.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Royal Enfield Bullet 350
Bullet 350 Before starting, position your Royal Enfield Bullet 350 upright using the appropriate motorcycle stand, then run the engine for a few minutes to help…
How to Change the Engine Oil on the Royal Enfield Bullet 350
How to Change the Engine Oil on the Royal Enfield Bullet 350
Bullet 350 Today, let's discover the instructions on how to perform the routine maintenance service by changing the engine oil on the Royal Enfield Bullet 350. …
Replace the Front Headlamp Lens on the Royal Enfield Standard Bullet 350
Replace the Front Headlamp Lens on the Royal Enfield Standard Bullet 350
Bullet 350 This video outlines the steps to remove and replace the lens (or glass) of the front headlamp on the Royal Enfield Standard Bullet 350. First, remove…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos