Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Enfield
    3. :
  3. Bullet 350
    4. : How to change the engine oil of a Royal Enfield Bullet 350

Model: Enfield Bullet 350
Part: Engine oil
How to change the engine oil of a Royal Enfield Bullet 350

Before starting, we will have to position our Royal Enfield Bullet 350 in a vertical position, with the help of the special motorcycle stand, and then let the engine run for a few minutes, so as to facilitate the oil leakage. So let's start by placing a container under the lower oil drain nut, and then unscrew the nut itself. In doing so, the engine oil will begin to drain. Once the oil has completely flowed out, we will have to screw the lower nut back on, then unscrew and remove the top filler cap. At this point, we will have to fill in the new engine oil, and finally we will have to screw the filler nut back on. When we have completed this step, the replacement will be complete.


Posted on 8 February 2024 by ScegliAuto

This video is currently unavailable

Changing the engine oil and oil filter of the Husqvarna FE 350

Let's find out in this short and simple guide how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the Husqvarna FE 350 enduro motorcycle. First of all, let's warm up the engine for a few minutes and start unscrewing the oil vent bolt that we find under the engine, letting it drain in a container for about ten minutes; after which we are going to remove and replace the small oil filter cartridge as well, by unscrewing the two screws of the cover that we find at the bottom, on the left of the engine, as shown in the video. Let's pour in the new oil!

Watch the video!


by ScegliAuto

More videos