Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, let's discover the instructions on how to perform the routine maintenance service by changing the engine oil on the Royal Enfield Bullet 350. First, place your motorcycle on the stand and start by undoing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the drain plug thoroughly from any metal debris. Next, undo the oil filler cap, located on the top of the crankcase, and pour in the new oil, following the specifications indicated in the owner's manual for your motorcycle!

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Royal Enfield Bullet 350?
How to Change the Engine Oil in the Royal Enfield Bullet 350?
Bullet 350 In this tutorial, see how to change the engine oil in the Royal Enfield Bullet 350, a very simple and quick operation. First, wait for the engine to …
How to Change the Engine Oil on a Royal Enfield Bullet 350
Bullet 350 Before starting, position your Royal Enfield Bullet 350 upright using the appropriate motorcycle stand, then run the engine for a few minutes to help…
How to Change the Engine Oil of the Royal Enfield Bullet?
How to Change the Engine Oil of the Royal Enfield Bullet?
Bullet 350 To change the engine oil of the Royal Enfield Bullet, first, unscrew the drain plug located at the bottom of the bike, just in front of the stand. On…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos