Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Royal Enfield Meteor 350

Model: Enfield Meteor 350
Part: Headlight bulb

Video tutorial

In this video tutorial, you will learn how to disassemble and replace the headlight bulb on a Royal Enfield Meteor 350, following the instructions below. First, place the bike on its centre stand and start unscrewing the two fixing screws of the bezel located on the sides; then remove the front lamp by disconnecting the electrical connector of the bulb, as shown in the video.

At this point, replace the dipped beam bulb with a new one of the correct type (in this case, H4); insert it in the correct orientation and reassemble the front optical unit!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350
How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350
Meteor 350 In this tutorial, see how to replace the front headlamp bulb on a Royal Enfield Meteor 350, a very simple and quick operation. First, ensure the key …
How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350?
How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350?
Meteor 350 This tutorial shows how to replace the front headlamp bulb on a Royal Enfield Meteor 350, a very simple and quick operation. First, ensure that the k…
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
Meteor 350 To replace the headlamp bulb on the Royal Enfield Meteor 350, loosen the screws that secure the headlight unit within its housing: these screws are l…

How to Replace the Battery on the Honda CRF 250F

The battery installed on the Honda CRF 250F can be replaced by loosening the screws that secure the panel located on the left side of the bike, just under the seat. This can now be removed from its securing screws so that the power cables can be disconnected; at this point, you can insert the new battery into its place. The new battery can be secured with the appropriate screws and connected to the relevant power cables: then cover everything with the panel.

Watch the video!


by ScegliAuto

More videos