Do it yourself
| ||||
|
Model: Enfield Himalayan
In this video we will see how to disassemble and replace the clutch plates of the Royal Enfield Himalayan motorcycle, following the instructions below. First we go to drain the engine oil, unscrewing the vent bolt that we find under the engine; after which we unscrew all the screws of the clutch casing, which we find on the sides, also disconnecting the clutch cable from the adjuster, as shown in the video. At this point we unscrew the screws of the clutch pack, in order to remove the discs; we just have to replace them with new ones, following the video to the end!
Posted on 29 June 2022 by ScegliAuto
|
How do you replace the front brake disc and pads of the LML Star?In order to replace the front brake disc and pads of the LML Star you need to loosen the nut that fixes the front wheel to the base of its forks. Once the nut has been loosened, it will be possible to remove the wheel and consequently unscrew the screws that secure the brake caliper to the relative disc. In this way it will be possible to unscrew the screws that fix the disc and remove the old pads from inside its housing. In this way all the parts can be replaced with new spare parts; after replacement, all the parts previously removed must be mounted. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |