Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Classic 350
Part: Wheel

Today, we will go through the steps to remove and replace the front wheel or tyre of the Royal Enfield Classic 350 in this brief and simple guide. First, place your motorcycle on the centre stand and begin loosening the central axle nut using a 24 mm and a 17 mm spanner. Then, remove the front wheel as shown in the video. At this point, if necessary, replace the front tyre with a new one, then refit the wheel; grease the axle and secure everything correctly, following the video to the end!

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Wheel on Royal Enfield Classic 350
Removing the Front Wheel on Royal Enfield Classic 350
Classic 350 In this video tutorial, learn how to remove the front wheel of a Royal Enfield Classic 350. First, unscrew the central bolt with a 24 mm spanner and …
How to Replace the Rear Wheel of the Royal Enfield Classic 350
How to Replace the Rear Wheel of the Royal Enfield Classic 350
Classic 350 In this brief and simple guide, follow the instructions to remove and replace the rear wheel of the Royal Enfield Classic 350 motorcycle. First, plac…
Replacing the Speedometer Cable on a Royal Enfield Classic 350
Replacing the Speedometer Cable on a Royal Enfield Classic 350
Classic 350 Today, we will see in this video tutorial how to remove and replace the speedometer cable on a Royal Enfield Classic 350 motorcycle. First, place the…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos