Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Classic 350
Part: Wheel

In this brief and simple guide, follow the instructions to remove and replace the rear wheel of the Royal Enfield Classic 350 motorcycle. First, place your motorcycle on the centre stand and start by removing the central axle of the wheel using a socket spanner with an extension; then remove the rear brake caliper, as shown in the video. At this point, remove the rear wheel, replacing the tyre if necessary; finally, reassemble everything and install the drive chain, following the video tutorial to the end!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Replace the Rear Brake Pads on the Royal Enfield Classic 350
How to Replace the Rear Brake Pads on the Royal Enfield Classic 350
Classic 350 In this brief and simple guide, you will learn how to remove and replace the rear brake pads on the Royal Enfield Classic 350 motorcycle, as well as …
How to replace the engine oil in the Royal Enfield Classic 350?
How to replace the engine oil in the Royal Enfield Classic 350?
Classic 350 In this tutorial we can see how to replace the engine oil in the Royal Enfield Classic 350, an extremely simple and fast operation. First of all, mak…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos