Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Royal Enfield Classic 350

Model: Enfield Classic 350
Part: Engine oil

Video tutorial

To change the engine oil of the Royal Enfield Classic 350, loosen the drain plug located at the central lower part of the motorcycle. Once the plug is loosened, allow all the used oil to drain into a suitably positioned container.

When the oil has completely drained, close the plug and loosen the screws securing the oil filter protection panel on the right side of the motorcycle. This will allow you to replace the oil filter, and finally, top up through the breather also located on the right side.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Royal Enfield Classic 350?
How to replace the engine oil in the Royal Enfield Classic 350?
Classic 350 In this tutorial we can see how to replace the engine oil in the Royal Enfield Classic 350, an extremely simple and fast operation. First of all, mak…
Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Replace the Engine Oil of the Royal Enfield Classic 350?
How to Replace the Engine Oil of the Royal Enfield Classic 350?
Classic 350 To carry out the engine oil replacement of the Royal Enfield Classic 350, unscrew the drain plug of the oil sump located at the bottom centre of the …

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos