Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Fiat Toro
    4. : Spacers

Fiat Toro - Spacers

Fiat Toro (2016-2023 / MK 1)
How to mount the spacers on the axles of the Fiat Toro?
In order to install the wheel spacers on the car, and therefore increase the wheelbase, it is necessary to proceed as follows: first of all disassemble the …read all…
Posted on 24 November 2022 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Air Vents (1) Key (2) Air conditioning (1) -board computer (5) Checks and maintenance (4) Differential (1) Spacers (1) Fog lights (1) Cabin air filter (3) Light bulb (1) Interior lights ceiling light bulb (1) Engine (1) Engine oil (2) Door panel (1) Fuse box (1) Suspensions (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos