Do it yourself
| ||||
|
Fiat Toro - Video tutorial
Model: Fiat Toro
MK 1
- Years 2016-2023 In order to install the wheel spacers on the car, and therefore increase the wheelbase, it is necessary to proceed as follows: first of all disassemble the wheel, thoroughly clean the seat of the hub on which we are going to position the spacer, after which we take the first spacer and position it on the hub seat. Then screw the bolts supplied with the kit with relative washer on the hub. At this point, take the rim again and reassemble it by tightening its bolts. Subsequently, we carry out the same operations to mount the other spacers on the other three wheels.
Posted on 24 November 2022 by ScegliAuto
This video is currently unavailable
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |