Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Interior dome light bulb

Don't know how to replace the bulbs in your car's interior lighting? This video shows how to replace the bulb in the ceiling light of a Fiat Bravo. Using a screwdriver or plastic lever, pry between the ceiling light and the headlining (without damaging the headlining), pull the ceiling light out of the panel and disconnect the power connector. Replace the damaged bulb with a new one (same size and voltage). Refit the ceiling light into its housing (push it in with your hands until the metal clips lock into place). Test the correct operation of the bulbs previously fitted.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear light of the Fiat Bravo 2
How to disassemble the rear light of the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) Let's find out together how to disassemble and replace the rear light and the bulbs that we find inside the Fiat Bravo second series. First of all, w…
How to replace the led courtesy lights on a Fiat Bravo?
How to replace the led courtesy lights on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) This video tutorial will explain how to change the courtesy lights (therefore those inside the passenger compartment) in our Fiat Bravo. First of all…
How to replace the fog light bulbs on a Fiat Bravo?
How to replace the fog light bulbs on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) Watching this video tutorial, we will find out how to replace the halogen fog light bulbs with led ones (H11) on our Fiat Bravo. To carry out this ty…

How to Replace the Timing Belt on the BMW X3

Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove the screws to take off the upper panels. Now you need to remove the air filter cover from the engine. In any case, you will need to remove all obstructing parts until you reach the belt. In the diagram, you can see which pulley acts as the tensioner, so loosen it to remove the belt. Once the tension is off the belt, you can take it out and replace it without issues. Retrace the steps in reverse for reassembly of the various components.

Watch the video!


by ScegliAuto

More videos