Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Starter motor

This task involves an essential electrical component for your vehicle. After releasing and lifting the bonnet, raise the car and place it on appropriate axle stands. This will allow you to work more comfortably. Now, after locating the starter motor, disconnect the power cables attached to it, then undo the bolts securing it in place. Remove it and carry out the necessary work. Reverse the steps described for reassembling the various components.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor from a Fiat Punto
How to Remove the Starter Motor from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, open the bonnet of your Fiat Punto. Begin by removing the upper engine cover to access the starter motor. Before proceeding with the…
How to Replace the Starter Motor on a Fiat Grande Punto?
How to Replace the Starter Motor on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the starter motor on a Fiat Grande Punto, open the bonnet to disconnect the terminals connected to the battery; once the device is disconn…
How to Replace the Starter Motor on a Fiat Punto 1.2
How to Replace the Starter Motor on a Fiat Punto 1.2
Fiat Punto (1999-2011 / MK 2, 188) Today, discover the guide and steps to remove and replace the starter motor on a Fiat Punto 1.2. First, open the bonnet of the vehicle and begin by r…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos