Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Starter Motor of the Fiat Grande Punto 1.3 Multijet

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Starter motor

See other generations:
Video tutorial

Today's main instructions will show you how to dismantle and replace the starter motor of the Fiat Grande Punto 1.3 Multijet. First, open the bonnet and begin disconnecting both battery terminals (positive and negative); then remove the battery and battery tray, as shown in the video.

To access the starter motor, you will need to raise the vehicle, unscrewing its fixing bolts and disconnecting the wiring to remove it and replace it with the new one; reassemble and check the operation of the new starter motor!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Guide to Removing the Starter Motor from the Fiat Grande Punto
Guide to Removing the Starter Motor from the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide provides instructions for removing and replacing the starter motor on the Fiat Grande Punto and Punto Evo. First, open the bonnet and loca…
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Replacing the Timing Chain of the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the main steps to remove and replace the timing chain of the Fiat Grande Punto 1.3 MultiJet, as well as the Fiat Panda and Fiat 5…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos