Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
188, MK 2
- Years 1999-2011 Today we will discover the guide and steps that will allow us to disassemble and replace the starter motor of the Fiat Punto 1.2. First of all, let's open the car's engine hood and start by removing the battery. Then, we lift the car to access the starter motor screws and unscrew them, as shown in the video. At this point, we disconnect the electrical wiring found on the top part, removing and replacing the starter motor with the new one. Finally, we install the original starter motor by applying the reverse procedure!
Posted on 29 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |