Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Starter motor

To replace the starter motor on a Fiat Grande Punto, open the bonnet to disconnect the terminals connected to the battery; once the device is disconnected, lift the car with a jack, locating the starter motor at the bottom of the vehicle, near the right front wheel's driveshaft. Here, unscrew the bolts that secure the starter motor to its supports, disconnecting all connectors as well; once the old starter motor is freed, you can insert the new spare part and check that everything works correctly.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Refit the Starter Motor on a Fiat Grande Punto?
How to Refit the Starter Motor on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To refit the starter motor on the vehicle, lift the car from under the engine compartment, position the motor in its housing, and secure it with its …
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
How to Replace the Air Filter in a Fiat Grande Punto?
How to Replace the Air Filter in a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, see how to replace the air filter in a Fiat Grande Punto, an extremely simple and quick operation. First, ensure that the engine is…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos