|
Do it yourself
| |||
| ||||
Replacement of Front Brake Pads
Model: Fiat Punto
199, MK 3, Grandepunto , Punto EVO
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
The video shows, in a friendly manner thanks to its creators, how to replace the worn brake pads with the new ones you have purchased. To begin, lift the car and remove the wheel, then proceed to remove the safety cap that hides the support screw of the caliper, and unscrew it along with the other screws that hold the caliper to the disc. Open the caliper by levering it, thereby removing the pad to be replaced and changing it with the new one. At this point, you can start reassembling everything, but first, ensure that the caliper operates correctly by pressing the brake pedal with the ignition on. The video refers to the Fiat Punto model. The tools required are a screwdriver and a special key (Torx), which you will likely find in the tool compartment in the boot.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Fiat Punto
(1999-2011 /
MK 2, 188)
Are the front brake pads worn? Here’s how to change them from inside the caliper. Raise the car to a comfortable working height. Unscrew the pins usi…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
This guide reveals the main instructions for removing and replacing the front brake pads of the Fiat Grande Punto. First, lift the vehicle and remove…
Fiat Punto
(1999-2011 /
MK 2, 188)
This guide shows how to replace the front brake pads on the Fiat Punto 188. After unscrewing the brake fluid reservoir cap, unscrew the wheel bolts b…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.110
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
