Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Fiat Punto 188

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

See other generations:
Video tutorial

This guide shows how to replace the front brake pads on the Fiat Punto 188. After unscrewing the brake fluid reservoir cap, unscrew the wheel bolts before lifting the vehicle. Complete the wheel removal with the vehicle lifted.

Using a lever, retract the pistons and pads. Clean the caliper retaining bolt, detach the retaining pin, and lift the caliper.

Clean the pad housing and fully retract the brake piston. Apply anti-squeal paste to the contact surfaces and fit the new pads.

Clean the parts before refitting the wheel. Check the proper functioning of the brakes before hitting the road.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads on a Fiat Punto
Replacing Front Brake Pads on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Are the front brake pads worn? Here’s how to change them from inside the caliper. Raise the car to a comfortable working height. Unscrew the pins usi…
How to Replace Brake Pads on the Fiat Punto
How to Replace Brake Pads on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In today's video, learn how to replace the brake pads on the Fiat Punto 188, the second series of the well-known Italian small car. First, lift the v…
Replacing the Front Brake Pads of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide reveals the main instructions for removing and replacing the front brake pads of the Fiat Grande Punto. First, lift the vehicle and remove…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos