Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glass of the External Rear-View Mirror on the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Side mirror

See other generations:
Video tutorial

In this brief guide, follow the instructions to remove and replace the glass of the external rear-view mirror on the Fiat Ducato. First, move to the outside and lever the side of the mirror glass until it detaches and comes off, disconnecting the electrical connector found at the back of the glass, as shown in the video.

If necessary, remove the lower glass of the mirror and replace it with the new one; connect it and finally adjust the glass!


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace the Glass on the External Wing Mirror of the Fiat Ducato
How to Replace the Glass on the External Wing Mirror of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) This guide will show you how to remove and replace the glass on the external wing mirror of the Fiat Ducato. First, move to the side of the vehicle a…
How to Remove the External Mirror on a Fiat Ducato
How to Remove the External Mirror on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) To remove the external mirror on a Fiat Ducato, use a lever (plastic or rubber) to pry between the perimeter of the mirror frame and the mirror glass…
Replacing the Mirror on a Fiat Ducato
Replacing the Mirror on a Fiat Ducato
Fiat Ducato (2002-2006 / ) This video demonstrates how to replace the external mirror on a Fiat Ducato. Use a plastic-coated lever to pry between the perimeter of the mirror fr…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos