Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front turn signal bulbs in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

In this tutorial we can see how to replace the front turn signal bulbs in the Fiat 500, an extremely simple and quick operation. First of all, make sure the key is not inserted, then open the hood, locate the small top cap on the back of the headlight in question and remove it. Then grip the bulb holder, rotate it slightly counterclockwise and remove it from the housing. At this point we can disconnect the old bulb, connect the replacement and reassemble everything following the reverse procedure.

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace Position Light on Fiat 500
Replace Position Light on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the bulbs in the front lights on a Fiat 500. Lift the bonnet to access the front lights and begin removing the bulbs. Disconnect the cover ca…
How to Replace the Front Position Bulbs on a Fiat 500
How to Replace the Front Position Bulbs on a Fiat 500
Fiat 500 (2007-2021 / 312) In today's tutorial video, you will learn how to remove and replace the front position bulbs, as well as the dipped beam bulb, on a Fiat 500. To acce…
How to disassemble and replace the front position lights bulbs of the Fiat 500
How to disassemble and replace the front position lights bulbs of the Fiat 500
Fiat 500 (2007-2024 / 312) In this guide, we will see the steps that will allow us to disassemble and replace the front position lights of the Fiat 500. First of all, let's mov…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos