Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Position Bulbs on the Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

In this guide, follow the steps to remove and replace the front position bulbs on the Fiat 500. First, move to the front of the vehicle and start by removing the plastic cover of the front wheel arch to access the position bulbs. Then, disconnect the electrical connector of the position light to remove it, as shown in the video.

At this point, install the new position bulb of the correct type and with the same fitting. Refit the plastic cover and finally check the operation of the light!


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Remove and Replace All Front Bulbs in Your Fiat 500
How to Remove and Replace All Front Bulbs in Your Fiat 500
Fiat 500 (2007-2021 / 312) This video will show you how to remove and replace all front bulbs in your Fiat 500 (indicator bulbs, dipped beam, headlights, and position lights). …
Replacing the Daytime Running Lights on the Fiat 500
Replacing the Daytime Running Lights on the Fiat 500
Fiat 500 (2007-2021 / ) In this video tutorial, you will learn how to remove and replace the position bulbs and the indicator bulbs on the Fiat 500 in simple steps. First, r…
How to Replace the Side Lights on a Fiat 500
How to Replace the Side Lights on a Fiat 500
Fiat 500 (2007-2024 / 312) Let's see how to replace the side lights on a Fiat 500: this can be done by removing the wheel, or simply by fully steering it to the opposite side. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos