Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove and replace all the front bulbs in your Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb
Operation: How to remove and replace all the front bulbs in your Fiat 500

This video will show you how to remove and replace all the front bulbs in your Fiat 500 (turn signals, low beam, headlights and position lights). To replace the turn signal bulbs, remove the plastic cover, take out the old bulb and replace it with a new one, then put everything back together. To replace the low beams, remove the plastic cover, push the tab and take out everything, remove the old bulb and insert the new one, finally put everything back together. To access the headlight bulbs, open the hatch located on the fender, pull the plastic cover and the black connector towards you, remove the old bulb by moving the tabs outwards and insert the new bulb with the flat side down , finally put the tab back in place and reattach the connector. To replace the sidelights, unscrew everything with pliers, remove the old bulb and insert the new one, then put everything back together. Now your Fiat 500 will have brand new front bulbs!


Posted on 29 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - Where are the front fog lights of the Fiat 500 mounted? Read Answer
    • 500 2012-2023 - Which dipped beam bulbs are fitted on the Fiat 500L? Read Answer
    • 500 2007-2022 - Why are the daytime running lights of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - The position lights of my Fiat 500 are not working, what can I do? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb in the vintage Fiat 500L? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb on a Fiat 500? Read Answer
    • 500 2012-2023 - How to replace the parking light on a Fiat 500X? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos