Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Position Bulbs on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the front position bulbs, as well as the dipped beam bulb, on a Fiat 500. To access the position bulb, first remove the front wheel arch liner; then remove the plastic protective cover for the bulbs and take out the small bulb found inside the headlamp, replacing it with a new one, as shown in the video.

At this point, disconnect the electrical connector of the dipped beam bulb to remove and replace it as well (this one is of type H7); then reassemble everything!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Front Position Bulbs on the Fiat 500
How to Remove and Replace the Front Position Bulbs on the Fiat 500
Fiat 500 (2007-2024 / 312) In this guide, follow the steps to remove and replace the front position bulbs on the Fiat 500. First, move to the front of the vehicle and start by …
Replace Position Light on Fiat 500
Replace Position Light on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the bulbs in the front lights on a Fiat 500. Lift the bonnet to access the front lights and begin removing the bulbs. Disconnect the cover ca…
How to Remove and Replace All Front Bulbs in Your Fiat 500
How to Remove and Replace All Front Bulbs in Your Fiat 500
Fiat 500 (2007-2021 / 312) This video will show you how to remove and replace all front bulbs in your Fiat 500 (indicator bulbs, dipped beam, headlights, and position lights). …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos