Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the front bulbs of the Fiat 500X?

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Headlight
Operation: How to replace the front bulbs of the Fiat 500X?

In today's video we will see how to replace the front bulbs of the Fiat 500X. We open the front hood by pulling the lever located inside the car. Let's now identify which of the two lighthouses needs intervention. Now let's remove the dust cover that hides the object in question inside. Now let's unhook the power connector and remove the burnt out bulb from its seat. The bulb in question is an H4, which you can find for sale almost everywhere. Let's now proceed in the same way to install the new bulb and test its operation, before closing everything. Operation finished.


Posted on 15 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - What can be the reason why the daytime running lights on the Fiat 500 do not light up? Read Answer
    • 500 2007-2022 - Why don't the daytime running lights on the Fiat 500 work? Read Answer
    • 500 2007-2022 - What model are the front position light bulbs of the Fiat 500 series 312? Read Answer
    • 500 2007-2023 - How to remove the headlights on Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos