Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Tail light bulb

How do you replace the rear light bulbs on a Fiat 500X? Let's see how to remove the light and replace the bulbs: open the boot lid, unscrew the securing screws located on the side of the light (right side). Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the burnt-out bulbs with new ones (same size and voltage). Finally, reassemble the light with the associated screws and reconnect the power connectors. Test the correct operation of the previously installed bulbs.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a Fiat 500X
How to Replace the Front Headlight Bulbs on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Learn how to replace the front headlight bulbs on a Fiat 500X. Begin by removing the plastic cover at the bottom of the bumper with an appropriate sc…
How to Remove the Rear Light on Fiat 500L
Fiat 500 (2014-2022 / 500 X) How to remove the rear light on Fiat 500L? Follow these steps to disassemble the part: first, open the boot lid, then use a lever to remove the plast…
How to Replace the Front Headlight Bulb on a Fiat 500X
How to Replace the Front Headlight Bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video, learn how to replace the position light bulbs on a Fiat 500X. Start by using a suitable screwdriver to remove the plastic cover locate…

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos