Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Headlight bulb

In this video, learn how to replace the position light bulbs on a Fiat 500X. Start by using a suitable screwdriver to remove the plastic cover located at the bottom of the bumper to access the side fog light in the bumper. After removing the lamp holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover under the car's bumper with the attached pins (rivets). Test the lights to ensure they are functioning correctly. Perform this replacement on the headlights to maintain consistent illumination.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Fiat 500X?
How to Replace the Front Headlamp Bulb on a Fiat 500X?
Fiat 500 (2014-2022 / 500 X) To replace the front headlamp bulb on a Fiat 500X, open the bonnet to access the engine bay and locate the circular cap inside the headlamp. Once thi…
How to Replace the Front Headlight Bulb on a Fiat 500X
How to Replace the Front Headlight Bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this guide, we will provide instructions for removing and replacing the daytime running or position bulb of the front headlight on a Fiat 500X. To…
How to Replace the Front Headlight Bulbs on a Fiat 500X
How to Replace the Front Headlight Bulbs on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Learn how to replace the front headlight bulbs on a Fiat 500X. Begin by removing the plastic cover at the bottom of the bumper with an appropriate sc…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos