Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the External Wing Mirror on a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

This guide shows the procedure for removing and replacing the external wing mirror on a Fiat Punto Evo. First, move to the outside of the vehicle and start by removing the plastic cover beneath the mirror; then unscrew the screws underneath and disconnect the electrical connector for the glass adjustment, as shown in the video.

At this point, install the new external wing mirror, securing it properly, and finally adjust the angle of the glass!


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to replace the external rearview mirror of the Fiat Punto Evo
How to replace the external rearview mirror of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today we will explain how to replace the external rearview mirror of the Fiat Punto Evo car on your own. To replace the mirror, first we need to remo…
How to Replace the External Wing Mirror on the Fiat Punto?
How to Replace the External Wing Mirror on the Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will see how to replace the external wing mirror on the Fiat Punto, a very simple and quick task. First, position yourself in f…
How to remove the rear view mirror from a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the rear view mirror from a Fiat Punto, rotate the mirror to a vertical position to access the outer screws beneath the base. Unscrew them …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos