Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Motivation for the noise in the curve of a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: CV boot

In this video we can see the reasons why a Fiat Punto (but of course this motivation is valid for a large number of cars) when turning produces a loud noise at the level of the wheels, and often the wheels themselves are dirty with grease. In fact, we have a broken boot, from which we lose a lot of grease. We just want to give an indication of what to do: first of all we need to disconnect the steering head, isolate and disconnect the ABS sensor. disconnect the axle joint from the wheel hub, and then disconnect the boot, which is the object that has worn out, losing all the grease that has dirtied the wheel. We replace it with the new boot, which must be installed using a particular professional tool, which spreads the boot, inserting it into the joint extremely easily. We put back the steering head, the ABS sensor and take a test drive, which will confirm that the defect has been eliminated.

Posted on 3 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heating Radiator on a Fiat Punto 188?
How to Replace the Heating Radiator on a Fiat Punto 188?
Fiat Punto (1999-2011 / MK 2, 188) The reason for the heating failure in the cabin of the Fiat Punto may be a broken radiator. To proceed with its replacement, this video will help. It…
Noise from the Ventilation Fan
Fiat Punto (1993-1999 / MK 1, 176) Over time, leaves and debris can accumulate in the heating fan. This results in an unusual and annoying noise from the fan, and if the problem is not…
Anti-Roll Bar Bush Replacement
Anti-Roll Bar Bush Replacement
Fiat Punto (1999-2011 / MK 2, 188) If you hear noise coming from the front wheel, it is likely that a bush on the suspension wishbone or anti-roll bar has failed. Lift the vehicle on a…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos