Do it yourself
Frequently asked questions about cars and motorcycles

How to Lubricate the Door Hinge on a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In today's tutorial video, you will see how to eliminate the annoying squeak when opening or closing the door of the Fiat Punto Evo, as well as the Grande Punto and all other models from the manufacturer. First, open the door of your car and lubricate the hinge; to do this, apply grease suitable for the material of the hinge.

At this point, spread the lubricant well and open and close the door several times until the noise completely disappears; perform the same operation on all other doors!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) Let's see how to resolve the annoying noise from the hinge of a Fiat Punto. Add an O-ring (seal) to your rod. Open the car door, and with a hex key, …
Fiat Punto (1999-2011 / MK 2, 188) In today's video, you will learn how to remove the door of a Fiat Punto. Here are the main steps to do this: first, open the door and unscrew the scr…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This tutorial shows how to remove the door panel on a Fiat Punto Evo, a very simple and quick operation. First, open the door you will be working on,…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos