Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car door

See other generations:
Video tutorial

In today's video, you will learn how to remove the door of a Fiat Punto. Here are the main steps to do this: first, open the door and unscrew the screws found in the hinge; then, remove the hinge by unscrewing the screws, and you can extract the door carefully.

If the screws are difficult to unscrew due to rust, spray a little penetrating oil to assist with removal. Once removed, disconnect any cables; for reassembly, apply the reverse procedure.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Removing the Front Door of the Fiat Punto
Removing the Front Door of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) The instructions in this guide will allow you to remove the front door of the Fiat Punto. First, open the front door and start unscrewing the bolts f…
Removing the Front Door Lock on a Fiat Punto 188
Removing the Front Door Lock on a Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) In today's video, you will learn how to remove the front door lock on a Fiat Punto 188 by following these simple steps. First, open the front door an…
How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the Fiat Punto door switch located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos