Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Fiat Punto Evo?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Door trim panel

This tutorial shows how to remove the door panel on a Fiat Punto Evo, a very simple and quick operation. First, open the door you will be working on, then remove both the cap inside the opening handle and the one in the armrest. Next, unscrew the two screws that are now exposed, remove the window switch console, and disconnect the various power connectors. Finally, unscrew the two side screws, lever along the perimeter of the panel, and separate it from the door. To install the replacement, simply follow the reverse procedure.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
How do you remove the door panel of the Fiat Punto Evo?
How do you remove the door panel of the Fiat Punto Evo?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to remove the door panel of the Fiat Punto Evo, you need to loosen the screws that hold it in place: these screws are located inside the han…
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos