Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How the Fiat 500L automatic dual zone heating system works

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Air conditioning
Operation: How the Fiat 500L automatic dual zone heating system works

Let's see how the Fiat 500L automatic dual-zone heating system works: enter the passenger compartment, turn on the instrument panel with the appropriate key, then turn on the air conditioner with the system start button (located on the rotation knobs). We use the left knob to adjust the temperature (by turning the knob) climate ignition, with the central knob we go to adjust the flow of the air jet, ignition of the system. Right knob. Passenger side temperature, automatic climate and synchronization. Finally we turn off the instrument panel with the key.


Posted on 17 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - What is the quantity of refrigerant gas for the Fiat 500x and 500l? Read Answer
    • 500 2007-2022 - Why doesn't the hot air work in the FIAT 500? Read Answer
    • 500 2007-2022 - How much gas is needed for the air conditioning of the Fiat 500? Read Answer
    • 500 2012-2023 - How much coolant is needed for the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos