Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to reset the dual zone climate of the Fiat 500 L

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Air conditioning
Operation: How to reset the dual zone climate of the Fiat 500 L

In this video tutorial you can see how it is possible to reset the dual zone climate of the Fiat 500 L, following simple steps that will guide you step by step to the correct management of your vehicle. First, get in the vehicle and secure with the handbrake. Second turn on the instrument panel. Third step you must turn off the air conditioning, then you must simultaneously hold down the three buttons of the air conditioning system, (Car button, power button and recirculation button) as shown in the video. Press and hold until the numbers flash. At this point you have cleared the bi-zone climate.


Posted on 18 September 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - Why doesn't hot air come out of the Fiat 500? Read Answer
    • 500 2007-2022 - What problems does the automatic climate control of the Fiat 500 have? Read Answer
    • 500 2007-2022 - How to solve an air conditioning problem on the Fiat 500? Read Answer
    • 500 2007-2022 - Why does the air conditioning of the Fiat 500 no longer work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos