Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the cabin air filter of the Fiat Egea.

Model: Fiat Fiat Various
Part: Cabin air filter

Video tutorial

To keep dust and dirt out of the ventilation system of the Fiat Egea's cabin, a filter takes care of it, which must be changed every fifteen thousand kilometers. To do this, we open the glove compartment in front of the front passenger.

We remove the two blocks we find on the sides at the bottom. We release the latch on the left side and rotate the drawer downwards.

Mounted horizontally, we find the filter cover, open it and remove the filter element, insert a new one, close the cover and put the drawer back in place inserting the latch and the two blocks.


Posted on 21 March 2025 by ScegliAuto


Related tutorials

Fiat Fiat Various To reset the Service light on the Fiat Egea, insert the ignition key into the ignition and turn it to power on the instrument panel. Once the panel i…
Fiat Fiat Various To completely reset the Service light of the Fiat Egea, you will need to turn on the instrument panel without starting the engine, by turning the ign…
Fiat Fiat Various To reset the Service light on the Fiat Egea, connect a diagnostic tool to the vehicle's OBD port, which is located on the dashboard just below the st…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Spare Wheel on a Citroen C4 Grand Picasso

Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern!

Watch the video!


by ScegliAuto

More videos