Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light of the Fiat Egea?

Model: Fiat Fiat Various
Part: Service warning light

To completely reset the Service light of the Fiat Egea, you will need to turn on the instrument panel without starting the engine, by turning the ignition key inside the corresponding block: once the panel has been activated, you can hold down the accelerator pedal and at the same time press the brake pedal seven times in a row. Once this operation has been completed, you can release the pedals and then turn off and on the panel to verify the reset of the light.

Posted on 28 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Fiat Various The operation of resetting the Service light on the Fiat Egea involves inserting the ignition key into the ignition switch, turning it to start the i…
Fiat Fiat Various To reset the Service light on the Fiat Egea, connect a diagnostic tool to the vehicle's OBD port, which is located on the dashboard just below the st…
Fiat Fiat Various When the service light of the car turns on, it means that we need to perform the car service and then reset the light. Performing the reset of the se…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos