Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Fiat Egea

Model: Fiat Fiat Various
Part: Service warning light

When the service light of the car turns on, it means that we need to perform the car service and then reset the light. Performing the reset of the service light on a Fiat Egea vehicle is a practical and quick maintenance operation to be carried out independently. To perform this reset operation, we must: - turn on the car's instrument panel; - press the brake pedal and keep it pressed until the reset of the light is complete; - press the accelerator pedal ten times; - release both pedals; - turn off and on the instrument panel; If the service light does not reset, it may be necessary to go to the workshop.

Posted on 24 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Fiat Egea?
How to Reset the Service Light on the Fiat Egea?
Fiat Fiat Various To reset the Service light on the Fiat Egea, connect a diagnostic tool to the vehicle's OBD port, which is located on the dashboard just below the st…
How do you reset the Service light of the Fiat Egea?
Fiat Fiat Various The operation of resetting the Service light on the Fiat Egea involves inserting the ignition key into the ignition switch, turning it to start the i…
How do you reset the Service light of the Fiat Egea?
How do you reset the Service light of the Fiat Egea?
Fiat Fiat Various To completely reset the Service light of the Fiat Egea, you will need to turn on the instrument panel without starting the engine, by turning the ign…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos