Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2019 Fiat Egea

Model: Fiat Fiat Various
Part: Service warning light

This video tutorial shows how to perform the service light reset procedure independently on a 2019 Fiat Egea. To carry out this simple procedure, turn on the dashboard and press the brake pedal and the accelerator pedal. Release and press the accelerator pedal seven times. On the seventh time, press the pedal and start the engine. An audible signal will indicate that the service light has been turned off, confirming that the reset has been successful. After this procedure, you can head straight onto the road.

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Fiat Egea
How to reset the service light on the Fiat Egea
Fiat Fiat Various When the service light of the car turns on, it means that we need to perform the car service and then reset the light. Performing the reset of the se…
How to Reset the Service Light on the Fiat Egea?
How to Reset the Service Light on the Fiat Egea?
Fiat Fiat Various To reset the Service light on the Fiat Egea, connect a diagnostic tool to the vehicle's OBD port, which is located on the dashboard just below the st…
How do you reset the Service light of the Fiat Egea?
Fiat Fiat Various The operation of resetting the Service light on the Fiat Egea involves inserting the ignition key into the ignition switch, turning it to start the i…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos