Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from a Fiat Dino

Model: Fiat Fiat Various
Part: Engine

This guide provides the main instructions for disassembling and removing the engine from the body of the Fiat Dino. First, lift the vehicle and start disconnecting the engine from its mounts, keeping it elevated with a jack. Remove the front wheels and disconnect both drive shafts, also detaching the suspensions as shown in the video. At this point, disconnect the transmission from the engine, removing the various wiring; then disconnect the fuel supply to remove the engine from the body, following the video tutorial to the end!

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Cleaning the Throttle Body on the 1.9 CDTI - JTD Engine on Fiat and Opel
Removing and Cleaning the Throttle Body on the 1.9 CDTI - JTD Engine on Fiat and Opel
Fiat Fiat Various In this simple guide, you will find the steps to remove and clean the throttle body on the 1.9 CDTI and 1.9 JTD engines fitted in Opel and Fiat, as w…
Replacing Big End Bearings on Fiat 1400 Engine - 16 Valves
Replacing Big End Bearings on Fiat 1400 Engine - 16 Valves
Fiat Fiat Various First, remove the engine air filter by unscrewing the three screws that secure it, disconnecting the clamp, and finally removing the duct. Next, remo…
How to Replace the Timing Belt on a Fiat 1.2 or 1.4 Engine?
How to Replace the Timing Belt on a Fiat 1.2 or 1.4 Engine?
Fiat Fiat Various To replace the timing belt on a Fiat with a 1.2 or 1.4 engine, first remove the plastic cover located at the bottom of the car, protecting the engine…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos