Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gearbox Oil in a Fiat MultiJet

Model: Fiat Fiat Various
Part: Transmission

In this video, you will see how to change the gearbox oil in a Fiat with a MultiJet engine: the vehicle in question has already covered over 93,205 miles. Locate the screw that allows for the oil drainage, using a 10 mm Allen key. Let the oil drain out (to be honest, the actual drain plug is not the one shown in the video, but the one located lower down at the back). Before proceeding, ensure you unscrew the filler cap first and then the drain plug. If you do the opposite, you risk running out of oil, especially if the filler cap doesn't unscrew! The required oil is a Motul 75W85, introduced using a 500 ml Beta syringe from a two-litre container, but in reality, about 1.6 litres will be needed.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to repair the 1.3 Multijet engine heat exchanger on Fiat?
How to repair the 1.3 Multijet engine heat exchanger on Fiat?
Fiat Fiat Various Here’s how to repair coolant (water) leaks from the water-oil heat exchanger on the 1.3 Multijet engines of the Fiat group: to extract the heat excha…
How to Reset the Oil Warning Light on a Fiat MultiJet Engine
How to Reset the Oil Warning Light on a Fiat MultiJet Engine
Fiat Fiat Various Here’s how to reset the oil warning light on a Fiat MultiJet engine, whether it’s 1.3, 1.6, or 1.9, the process is the same. Naturally, before perfor…
Replacing Glow Plugs on 1.3 MultiJet Engines (Fiat, Opel)
Replacing Glow Plugs on 1.3 MultiJet Engines (Fiat, Opel)
Fiat Fiat Various In this tutorial video, you will learn how to remove and replace the glow plugs on 1.3 MultiJet engines found in Fiat and Opel vehicles. First, open …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos