Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on a Fiat MultiJet Engine

Model: Fiat Fiat Various
Part: Service warning light

Video tutorial

Here’s how to reset the oil warning light on a Fiat MultiJet engine, whether it’s 1.3, 1.6, or 1.9, the process is the same. Naturally, before performing this operation, ensure that all required services have been completed.

With all the vehicle doors closed, turn on the ignition without starting the engine; press the accelerator pedal all the way down. Without releasing it, press the brake pedal seven times.

After this, continue to hold the accelerator pedal for another sixty seconds without turning off the ignition, after which turn off the ignition and wait another sixty seconds. Turn the ignition back on. The light may flash a couple of times before turning off and will only come back on at the next service interval.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

Replacing the Gearbox Oil in a Fiat MultiJet
Replacing the Gearbox Oil in a Fiat MultiJet
Fiat Fiat Various In this video, you will see how to change the gearbox oil in a Fiat with a MultiJet engine: the vehicle in question has already covered over 93,205 m…
How to repair the 1.3 Multijet engine heat exchanger on Fiat?
How to repair the 1.3 Multijet engine heat exchanger on Fiat?
Fiat Fiat Various Here’s how to repair coolant (water) leaks from the water-oil heat exchanger on the 1.3 Multijet engines of the Fiat group: to extract the heat excha…
Tool to Reset the Service Light for Fiat Cars
Fiat Fiat Various In this video, you can see how to reset the service light for Fiat cars using the Launch diagnostic tool. Specifically for MultiJet diesel engines. F…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos