|
Do it yourself
| |||
| ||||
Tool to Reset the Service Light for Fiat Cars
Model: Fiat Fiat Various
In this video, you can see how to reset the service light for Fiat cars using the Launch diagnostic tool. Specifically for MultiJet diesel engines. First, select the car brand, in this case, Fiat, and create the association between the car and the diagnostic tool, then identify the exact model in question. Once done, a list of selectable engines will appear on the tool's display, followed by a list of operations and maintenance tasks for which a reset can be performed. Select your engine and the relevant item, for example, oil change, and click on it. A warning will appear showing the current mileage and the mileage at which the oil change should be performed again. The device will prompt you, based on the progress of the operation, to keep the ignition key in the Stop or Run position. Now return to the control unit list and select the instrument cluster control unit. Next, select the Specific Functions option and then the Maintenance Information Reset option. Once the message 'Operation Completed' appears on the display, the operation can be considered finished.
Updated on 3 May 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Fiat Fiat Various
To reset the Service light on the Fiat Egea, connect a diagnostic tool to the vehicle's OBD port, which is located on the dashboard just below the st…
Fiat Fiat Various
When the service light of the car turns on, it means that we need to perform the car service and then reset the light. Performing the reset of the se…
Fiat Fiat Various
To reset the Service light on the Fiat 124 Spider, turn on the instrument panel and navigate through the menu using the dial on the centre console. S…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.642
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
