Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Glow Plugs on 1.3 MultiJet Engines (Fiat, Opel)

Model: Fiat Fiat Various
Part: Glow plugs

Video tutorial

In this tutorial video, you will learn how to remove and replace the glow plugs on 1.3 MultiJet engines found in Fiat and Opel vehicles. First, open the bonnet of your car and disconnect the cables from the glow plugs: then, using a ratchet with an extension, unscrew the glow plugs, finishing by hand.

At this point, replace them with new ones, screwing them in by hand and then tightening with a torque wrench, setting the torque as per the workshop manual. Finally, close the bonnet and check the proper functioning of the vehicle.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to replace the glow plugs on a Fiat MultiJet 1.6 engine
How to replace the glow plugs on a Fiat MultiJet 1.6 engine
Fiat Fiat Various In this video we can see how to replace the glow plugs of a Fiat MultiJet 1.6 engine: we start by removing the cover of the engine block, then with a…
How to Replace the Glow Plugs on the 1.9 CDTI - JTD Engine (Opel - Fiat)
How to Replace the Glow Plugs on the 1.9 CDTI - JTD Engine (Opel - Fiat)
Fiat Fiat Various In this video, discover the steps to dismantle and replace the glow plugs on the 1.9 CDTI engine fitted in Opel models, as well as in Fiat and Alfa R…
How to repair the 1.3 Multijet engine heat exchanger on Fiat?
How to repair the 1.3 Multijet engine heat exchanger on Fiat?
Fiat Fiat Various Here’s how to repair coolant (water) leaks from the water-oil heat exchanger on the 1.3 Multijet engines of the Fiat group: to extract the heat excha…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos