Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to solve the problem of headlights filling with water

Model: Fiat 500 500 X - Years 2014-2022
Part: Headlight

In this video, we will see how to solve a really annoying problem, as it can cause serious issues to the electrical system: the first thing to do is to open the hood and look inside the rubber cap to see what happened inside the front headlight; perhaps the cap is not holding well and we can improve its seal with some silicone paste, which forms a sort of gasket. Remove the bulbs and proceed to dry the headlight from the inside with the help of a small hairdryer, inserting it into the hole where we removed the bulb. Leave it there, at a low temperature, until the moisture inside the headlight is completely dry.

Posted on 6 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to fix the problem of a Fiat 500's sunroof that doesn't close completely.
How to fix the problem of a Fiat 500's sunroof that doesn't close completely.
Fiat 500 (2007-2024 / 312) In this video, we will see how to solve the problem with the electrically operated sunroof of a Fiat 500, which stops just a few centimeters from ful…
How to solve the problem of vibration in the rear door panels on a Fiat 500x?
How to solve the problem of vibration in the rear door panels on a Fiat 500x?
Fiat 500 (2014-2022 / 500 X) In this video, we see how to solve a problem that occurs quite often, which is the noisy vibrations on the Fiat 500x. Our YouTuber has identified the…
A problem with the radiator on the Fiat 500l.
A problem with the radiator on the Fiat 500l.
Fiat 500 (2012-2023 / 500 L) In this video we see that the YouTuber, during the maintenance, noticed that the coolant, which was a bright pink color, has turned black, to the poi…

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos